- The raw water can be ground water, sea water, tap water or other water source, we choose suitable purify system based on raw water analysis report. The capacity usually from 1T up to 200T per hour.
Water treatment purify system for mineral water, pure water and other water for food and beverage industry. It is mainly composed of the following equipment: pre-treatment system (water tank, multi-medium filter, active carbon filter, ion exchanger, millipore filter), membrane system (ultra filter, nanometer filter, RO system), electrodialysis device, sterilization system (UV&Ozone), pure water tank., etc.
1. First stage pretreatment (Sand filter)
The use of multi-medium quartz sand filters, main purpose is to remove the water contains sediment, manganese, rust, colloid material, mechanical impurities, suspended solids and other particles in the above 20UM of substances hazardous to health.
2. Second stage pretreatment (Active carbon filter)
Activated carbon filters used to remove the pigment in the water, smell, a large number of chemical and biological organisms, reducing the residual value of water and pesticide pollution and other harmful pollutants.
3.Third stage pretreatment (Sodium ion filter)
Cationic resin used for water softening, primarily to remove hardness of water.
4. Fourth stage pretreatment (Micron filter)
Particle size in water to remove fine particles, sand filters can remove very small colloidal particles in the water.
5. RO system
Using reverse osmosis technology for desalination, reverse osmosis membrane was only 0.001 micron pore size, can be harmful to remove dissolved solids and bacteria, viruses, etc., desalination rate of more than 99.6 percent.