Product Description of Small Plastic Water Blow Moulding Machine / Bottle Making Machine / Manufactuer
Performance and Advantages
i . The man-machine interface is easy to operate. Everything is computerized, including temperature adjustment and preform distribution.
ii . Independent movable operation pannel, make the operation more convenient and flexible.
iii . Preform unscrambling, loading, bottle handling and ordering are all operated by stainless steel manipulator automatically without a second
contamination.
iv . During the process of the automatic embryo preform feeding system, each preform channel has photoelectric detection, control the action of
the upper motor and the parting cylinder, ensure the uniform distribution of the preform in each embryo channel, and have the function of
alarming the material shortage.
v . The circulating chilling water system as well as the fan with converter controlled can protect the bottle neck against deformation when the
preform is being heated.
vi . The homothermal heater adopts auto reflection and closed loop adjusting system which have the power supplied constantly in proportion,
not affected by the fluctuation of voltage. The conveying chain is short pitched and paratactic, which helps to realize slow heating and low power
consumption. As a result, the preform can be heated evenly and easy to blow.
vii . The positioned installation of molds makes it possible to change molds easily within one hour,the operator only need to stand on the ground
can finish this job, no need to stand on the machine frame,the safety for person is much higher.
viii . All the critical parts we use for the machines, such as the electrical, pneumatic components, servo motor, etc, are famous branded parts
imported from Japan, USA and Europe,which ensures the stability and long life of our equipments.
ix . The high pressure blowing valve is equipped with the device of converting to low pressure air, which can ensure the normal conversion
without low pressure air. Machine is equipped with the high pressure air recovery device, in the process of bottle blowing production, the high
pressure air can be recoveried and used for the cylinders/ pre-blow.
Technical Parameter
| Items | Unit | Model | |
| RiBo-8CR600 | |||
| Molding Spec. | Preform Pitch | mm | 76 |
| Preform Heating Pitch | mm | 38 | |
| No.of Cav. | cav. | 8 | |
| Container Spec. | Max.Container Volume | L | 0.7 |
| Neck Diameter Range | mm | 18~30 | |
| Max.Containr Diameter | mm | 70 | |
| Max.Containr Height | mm | 240 | |
| ※※Theoretical Output | bph | 19000~16000 | |
| Power Spec. | Rated Power | KW | 123 |
| Power Consumption | KW | 40~50 | |
| Compressor Spec. | Blowing Pressure | Mpa | 2.5~3.2 |
| Air Consuming | m3/min | 8 | |
| Main Machine Spec. | Size | mm | 6758*3331*3200 |
| Weight | Kg | 8500 | |
| *Due to continuous technical development specification would be improved without prior notice. | |||
| *Special designs correspond to customers needs. | |||