Product Model: KC-80L
Length and Width: 390*340mm
Total Height: 660mm
Lid Opening: 160mm
Thickness: 5mm
Widely used in water treatment industry for chemical dosing and drinking water series support
Raw Materials: LLDPE Taiwan Polymer 405 or Korean Hyundai 644 low-density polyethylene (PE)
Characteristic 1: Acid and alkali resistance: Please refer to the polyethylene chemical resistance table
Characteristic 2: The maximum temperature it can withstand is 70-80 degrees Celsius, and the freezing resistance must not be lower than -30 degrees Celsius.
Characteristic 3: This is a product for normal pressure. It should not be subjected to positive or negative pressure exceeding normal pressure (1 atmosphere). If stirring is required (stirring speed should not exceed 60 times per minute) or the acid and alkali concentration is above 1.2, it is best to install a reinforcing sleeve and thicken the tank wall. This characteristic is especially important for tanks with a holding volume exceeding 10,000L. (For sulfuric acid and nitric acid concentrations exceeding 28%, use premium grade products and preferably install reinforcing sleeves.)
Feature 4: This container is a rotationally molded, one-piece product, offering advantages such as being weld-free, seamless, non-toxic, odorless, easy to clean, and flexible to handle.