Goods1/2

$8571

Inventory: 10

Plastic cap slitting machine--- JOBO-28S

Name: Plastic cap slitting machine--- JOBO-28S
Brand: Taizhou Jobo Machinery Mould Co., Ltd.

Plastic cap slitting machine

Model

Scope of application

Terms of trade

Download PDF

Taizhou Jobo Machinery Mould Co., Ltd.

Membership category

Verified Supplier

Seller category

Processing Manufacturer

Plastic cap slitting machine :

20000-50000 pcs/hr

Machine working environment

Environment:
1.The relative humidity of the operating environment of the machine should be less than 50%; The designed working temperature range of the machine is: 5~35C.

2.It is recommended to use it in a constant temperature purification workshop of 20~25°C. If there is no purification workshop, a dehumidification device is required.

Water:

1.Use purified water or deionized water.

2.Antifreeze is required in cold areas where temperatures fall below freezing.

Electricity:
1.Power requirements: 380V/50Hz, three-phase five-wire system; Power system can be customized according to the customer's power supply,but this must be mentioned before cap design.
2 . The deviation between the external power supply voltage and the rated voltage should be kept at ±7%.

Compressed air:

1.Air consumption: host: JOBO-24CS 0.6m³/min; Auxiliary machine: 1.4m³/min; (including slitting machine, inspection machine).

2.Compressed air source pressure: 0.6-0.8 MPa, and the fluctuation value shall be less than 0.1 MPa.

3.Purification grade of compressed air pollutants shall conform to: GB/T 13277.1 solid particle grade 1, temperature and liquid water, etc. Grade 4, oil content grade 1. (room temperature, dry, clean air)CREATE VALUES FOR CUSTOMERS

Chiller:

1.1.1. Air-cooled chiller

- must be installed outside the plant of the main machine, kept well ventilated, and the temperature shall be 5~35°C.

- When installing the air-cooled chiller, keep distance from the surrounding walls at least 1.5 meters, and the top surface at least 2 meters.

1.1.1. Water-cooled chiller

- When the water-cooled chiller is installed outdoors, it must be protected against sun and rain, and consider anti-freezing measures in winter.

- When installing the water-cooled chiller, keep the distance from the surrounding walls at least 1 meters, and the top surface at least 1.5 meters.

1.1. Hydraulic station

1. Oil for hydraulic station: HM-46 (No. 46 anti-wear hydraulic oil) or ISO VG32 hydraulic oil can be used(CCM hydraulic station need at least 500liters of #46 anti-wear hydraulic oil).

Menu

Plastic cap slitting machine--- JOBO-28S

Plastic cap slitting machine :

20000-50000 pcs/hr

Machine working environment

Environment:
1.The relative humidity of the operating environment of the machine should be less than 50%; The designed working temperature range of the machine is: 5~35C.

2.It is recommended to use it in a constant temperature purification workshop of 20~25°C. If there is no purification workshop, a dehumidification device is required.

Water:

1.Use purified water or deionized water.

2.Antifreeze is required in cold areas where temperatures fall below freezing.

Electricity:
1.Power requirements: 380V/50Hz, three-phase five-wire system; Power system can be customized according to the customer's power supply,but this must be mentioned before cap design.
2 . The deviation between the external power supply voltage and the rated voltage should be kept at ±7%.

Compressed air:

1.Air consumption: host: JOBO-24CS 0.6m³/min; Auxiliary machine: 1.4m³/min; (including slitting machine, inspection machine).

2.Compressed air source pressure: 0.6-0.8 MPa, and the fluctuation value shall be less than 0.1 MPa.

3.Purification grade of compressed air pollutants shall conform to: GB/T 13277.1 solid particle grade 1, temperature and liquid water, etc. Grade 4, oil content grade 1. (room temperature, dry, clean air)CREATE VALUES FOR CUSTOMERS

Chiller:

1.1.1. Air-cooled chiller

- must be installed outside the plant of the main machine, kept well ventilated, and the temperature shall be 5~35°C.

- When installing the air-cooled chiller, keep distance from the surrounding walls at least 1.5 meters, and the top surface at least 2 meters.

1.1.1. Water-cooled chiller

- When the water-cooled chiller is installed outdoors, it must be protected against sun and rain, and consider anti-freezing measures in winter.

- When installing the water-cooled chiller, keep the distance from the surrounding walls at least 1 meters, and the top surface at least 1.5 meters.

1.1. Hydraulic station

1. Oil for hydraulic station: HM-46 (No. 46 anti-wear hydraulic oil) or ISO VG32 hydraulic oil can be used(CCM hydraulic station need at least 500liters of #46 anti-wear hydraulic oil).

2. Pay attention to the pollution control of hydraulic oil, and do not use hydraulic oil with a pollution degree lower than NAS9.

3. Keep the hydraulic system clean and remove the sludge and metal chips in the oil tank in time.

Tell Us What You Need

Plastic cap slitting machine--- JOBO-28S

Plastic cap slitting machine :

20000-50000 pcs/hr

Machine working environment

Environment:1.The relative humidity of the operating environment of the machine should be less than 50%; The designed working temperature range of the machine is: 5~35C.

2.It is recommended to use it in a constant temperature purification workshop of 20~25°C. If there is no purification workshop, a dehumidification device is required.

Water:

1.Use purified water or deionized water.

2.Antifreeze is required in cold areas where temperatures fall below freezing.

Electricity:1.Power requirements: 380V/50Hz, three-phase five-wire system; Power system can be customized according to the customer's power supply,but this must be mentioned before cap design.2 . The deviation between the external power supply voltage and the rated voltage should be kept at ±7%.

Compressed air:

1.Air consumption: host: JOBO-24CS 0.6m³/min; Auxiliary machine: 1.4m³/min; (including slitting machine, inspection machine).

2.Compressed air source pressure: 0.6-0.8 MPa, and the fluctuation value shall be less than 0.1 MPa.

3.Purification grade of compressed air pollutants shall conform to: GB/T 13277.1 solid particle grade 1, temperature and liquid water, etc. Grade 4, oil content grade 1. (room temperature, dry, clean air)CREATE VALUES FOR CUSTOMERS

Chiller:

1.1.1. Air-cooled chiller

- must be installed outside the plant of the main machine, kept well ventilated, and the temperature shall be 5~35°C.

- When installing the air-cooled chiller, keep distance from the surrounding walls at least 1.5 meters, and the top surface at least 2 meters.

1.1.1. Water-cooled chiller

- When the water-cooled chiller is installed outdoors, it must be protected against sun and rain, and consider anti-freezing measures in winter.

- When installing the water-cooled chiller, keep the distance from the surrounding walls at least 1 meters, and the top surface at least 1.5 meters.

1.1. Hydraulic station

1. Oil for hydraulic station: HM-46 (No. 46 anti-wear hydraulic oil) or ISO VG32 hydraulic oil can be used(CCM hydraulic station need at least 500liters of #46 anti-wear hydraulic oil).

2. Pay attention to the pollution control of hydraulic oil, and do not use hydraulic oil with a pollution degree lower than NAS9.

3. Keep the hydraulic system clean and remove the sludge and metal chips in the oil tank in time.

Tell Us What You Need

Environment:
1.The relative humidity of the operating environment of the machine should be less than 50%; The designed working temperature range of the machine is: 5~35C.

Electricity:
1.Power requirements: 380V/50Hz, three-phase five-wire system; Power system can be customized according to the customer's power supply,but this must be mentioned before cap design.
2 . The deviation between the external power supply voltage and the rated voltage should be kept at ±7%.