1. The valve body is sturdy, simple in structure, and has a long service life.
2. In case of failure, the steam trap is fully open, and no water will accumulate in the pipeline or equipment.
3. It can withstand water hammer, and the open bucket will not be damaged or flattened by water hammer.
4. Strong back pressure resistance, suitable for recovery systems.
5. Dirt resistant, the drain hole is located at the top of the valve body, and impurities in the pipeline will not accumulate at the valve hole; small particulate impurities are flushed out through the throttle hole.
6. Built-in filter, saving installation costs and space.
7. A check valve installed at the inlet can be used for superheated steam systems.
8. Stainless steel and hardened valve core and seat are used, which are wear-resistant and corrosion-resistant. Hardened valve core and seat are wear-resistant and corrosion-resistant.
9. The inverted bucket steam trap drains at saturated steam temperature and discharges air and non-condensable gases at saturated temperature.
10. The top cover of the inverted bucket has an inspection hole, and an inspection valve can be installed. After opening, it is possible to know whether the steam trap is working normally.
11. An optional built-in check valve can be used for condensate recovery systems, saving installation space and costs.
Advantages: Sturdy valve body, simple structure, long service life. Can withstand water hammer (compared with float steam traps). Built-in filter, easy to install, cost-saving. Can discharge air and non-condensable gases at saturated steam temperature. Can be used in high-pressure and high-temperature steam systems. If a check valve is installed at the inlet, it can be used for superheated steam systems. Discharges condensate at saturated steam temperature.