1,The servo motor is adopted to drive molding mechanism, triggering off a bottom linkage as well. The whole mechanism works speedy, accurately, stably and flexibly, as well as energy saving and environment protection.
2、With oil or electric heating, the molds can ensure bottle meets hot filling requirement and withstand temperature up to 92% without deformation. The single cavity can reach the capacity to 1000~800 BPH.
3、The servo motor drive stepping and stretching system, greatly improve blowing speed, flexibility and accuracy.
4、The continuous heating system, the preform heating pitch is 38mm, which effectively utilizes the heating space of the lamp tube and improves the heating efficiency and energy saving effect of the preforms
5、Constant temperature heating oven, ensure the surface and internal of each preform is heated evenly. The heating oven can be overturned, easy to replace and maintain the heating lamp.
6、High pressure blowing system is equipped with air recycling device (air recycling rate can be up to 30%) which may reduce power consumption as much as 30 KW per hour. No need low pressure air compressor, and minimize the investment to the floor space of the machine as well, energy saving and environment protection
7、Positioning installation to the molds, makes it possible for changing molds easily within 30 minutes.
8、The man-machine interface with high automation and easy to operate, compact size for occupying a small area.
9、This series is widely used for making PET hot filling bottle, such as juice, tea drink, energy drink and other hot filling drink.
Features and advantages
1.The servo motor is adopted to drive the molding mechanism, triggering off a bottom mold linkage as well. The whole mechanism works speedy, accurately, stably and flexibly. Meanwhile, it is energy efficient and environmental safe.
2. Oil or electricity heated, the mold can ensure bottles meet the hot filling requirement and withstand a temperature up to 92℃ without deformation. The capacity of each cavity can be up to 700~850bph.
3. The servo motor driven stepping unit and stretching mechanism have improved the speed, flexibility and accuracy of blowing.
4. 38mm pitched, more preforms are uninterruptedly heated within the same distance, which improves the efficiency and energy saving.
5. The thermostatic heating system ensure that the heating temperature of each preform surface and internal is uniform.Hinged oven holders make it easy for the operators to change infrared tubes and do maintenance.
6.The high pressure blowing system is also equipped with the gas recycling device (air recycling rate can be up to 30%)which may reduce power consumption as much as 30kw per hour.That means you do not need the low pressure air compressor any more, which will minimize your investment as well as the space for placing the machine. In one word, it is energy-efficient and environmental safe.
7.The simple slide-in way of mold mounting makes it possible for the operators to change molds easily within 30 minutes.
8.The man-machine interface is highly automated and easy to operate. The compact machine occupies a smaller area.