Note 1
The design conditions of this series of cooling towers are as follows: dry-bulb temperature 31.5℃, wet-bulb temperature 27℃, inlet water temperature 37℃, outlet water temperature 32℃, and atmospheric pressure 99.4 kPa.
The design conditions of this series of cooling towers are as follows: dry-bulb temperature 31.5℃, wet-bulb temperature 27℃, inlet water temperature 37℃, outlet water temperature 32℃, and atmospheric pressure 99.4 kPa.
Note 2
During the installation of the cooling tower pipeline, the customer shall add auxiliary pipe fittings such as Y-type strainers, valves and pressure gauges at the water inlet.
During the installation of the cooling tower pipeline, the customer shall add auxiliary pipe fittings such as Y-type strainers, valves and pressure gauges at the water inlet.
Note 3
The noise test point shall comply with Point 2 specified in the national standard GB 7190.1-2008 (i.e., at a distance equal to 1 time the tower diameter in the direction of the tower air inlet, and 1.5 meters above the ground).
The noise test point shall comply with Point 2 specified in the national standard GB 7190.1-2008 (i.e., at a distance equal to 1 time the tower diameter in the direction of the tower air inlet, and 1.5 meters above the ground).
Note 4
For fans with a diameter of less than 2100 mm, the standard configuration is a direct-drive motor without a reducer.
For fans with a diameter of less than 2100 mm, the standard configuration is a direct-drive motor without a reducer.