I. Product Description
This product introduces advanced foreign technologies from the 1990s. The large-area cooling of the straight wall is achieved through a fully automatic control system, allowing for one-step observation and operation. This enables the raw milk to be cooled to the required temperature rapidly and maintains a constant temperature continuously. Prevent the reproduction of bacteria and keep the original milk in Grade A milk condition.
Direct-cooling milk tanks are mainly used for cooling and storing fresh milk, and can also be used to cool and store other liquid materials. Our company designs and manufactures direct-cooling milk tanks by drawing on and absorbing advanced foreign technologies. The refrigeration compressor unit adopts high-performance and energy-saving fully enclosed compressors and is equipped with reliable protectors, which will not burn out the motor due to overload or system failure. The insulation layer adopts a new polyurethane foaming process, which has excellent thermal insulation performance. The tank body is made of high-quality stainless steel and is equipped with a cleaning device and a stirring device. Advanced technologies and equipment such as imported polyurethane integral foaming and honeycomb plate evaporators make it the most ideal cooling and storage equipment for pastures, milk stations, dairy factories, food factories, beverage factories and the pharmaceutical industry. Structural features
The tank wall adopts an advanced honeycomb Miller plate evaporator to directly exchange heat with milk for cooling.
2. The refrigeration unit adopts imported "Copeland" compressors from the United States, imported expansion valves and solenoid valves, and is equipped with reliable midpoint protectors, which will not burn out the compressor due to overload or system failure.
3. The tank body is made of SUS304 or 316 stainless steel, equipped with pressurized automatic rotating cleaning CIP spray heads and an automatic stirring device.
4. The insulation layer is made of polyurethane foam, which has excellent thermal insulation performance.
Customization is also available according to customer requirements. For more detailed information about this equipment, please contact us by phone. Thank you!
II.Protection device for air-cooled direct-cooling refrigeration unit
Phase loss and reverse phase protection device;
2. Motor overload protection device;
3. High and low pressure protection devices;
4. Low-temperature and anti-freezing protection device;
5. Coil overheat protection device.
Product features
1. Scroll compressor, stable operation, obvious cooling effect, energy-saving and environmentally friendly;
2. The board has strong strength and durability.
3. The inner tank is made of sanitary-grade SUS304 stainless steel, and the insulation layer is made of polyurethane foam.
4. Inner tank sealing performance: No leakage after 6 to 8 hours of full water test, 30KPA pressure test, and 50 minutes of pressure holding without pressure fluctuation.
5. The temperature measurement error is +/-1℃, and the temperature rise is ≤2℃ per 24 hours.
6. The intelligent stirring system can achieve a combination of automatic and manual stirring for uniform mixing and is easy to disassemble.
7. CIP rotary spray heads ensure no dead corners during cleaning.
8. It has a fast cooling speed and can quickly lower the temperature to ensure quality.
9. High refrigeration efficiency, low energy consumption, low operating cost, low noise, energy-saving and environmentally friendly.
10. The surface is smooth and clean, especially the arc part of the head, with no cleaning dead corners, which is convenient for thorough cleaning and avoids contamination.
11. It features stable performance, low failure rate, simple operation and long service life.
