The BTSX45 disc centrifuge is a specialized piece of equipment independently researched and developed by our company. This centrifuge is primarily used for the precise clarification of liquid-solid two-phase separation in the fermentation industry. All parts of the centrifuge that come into contact with the material are made of high-quality stainless steel, meeting industry GMP standards. The design, manufacturing, and acceptance of the equipment are strictly carried out in accordance with national standards.
-
Working Principle: The machine mainly consists of an import-export device, drum, vertical shaft, horizontal shaft, frame, speed measurement device, braking device, and electric motor. It uses a centrifugal pump structure for discharge, and the separated material is directly transported to downstream equipment through the centrifugal pump. The drum has undergone precise dynamic balancing verification, and the power transmission uses frequency conversion starting, which is smooth, prevents overloading, has low vibration, and is safe and reliable. The operation is simple and convenient. All bearings used in the equipment are of the Swedish SKF brand, ensuring the operational precision of the equipment. After the machine is equipped with a PLC control system, it can achieve programmed operation. After starting at full speed, allow the operating water to enter the sealing chamber, causing the piston to rise and close the sludge discharge port. Then introduce the separation material, which enters the disc separation area inside the drum through the feed pipe. Under the action of the centrifugal force field, the impurity particles gather along the inner surface of the disc to the inner wall of the drum. When they gather to a certain extent, allow the operating water to enter the opening chamber, causing the piston to drop and open the sludge discharge port. The impurities are discharged from the drum through the sludge discharge port and expelled outside the machine by the sludge collector; meanwhile, the light liquid phase gathers towards the center of the drum and is expelled outside the machine by the centrifugal pump, completing a cycle. Allow the operating water enter to the sealing chamber, causing the piston to rise and close the sludge discharge port... and so on, in cycles.
-
Equipment Features:
-
Automatic sludge discharge type, including partial and full sludge discharge.
-
Uses a labyrinth seal, and the discharge uses a centrifugal pump with high outlet pressure (light liquid), which can be directly transported.
-
The self-designed centrifugal pump system has stable output pressure, a wide adjustment range, and convenient operation.
-
The power transmission uses frequency conversion starting, which is smooth in operation, with no noise or odor pollution.
-
This series of centrifuges is specially designed with a fully automatic control cabinet equipped with safety protection devices, allowing direct adjustment of various parameters of the centrifuge (separation, sludge discharge time, etc.) on the display screen to achieve the best separation and sludge discharge effects.
-
Equipped with a fully automatic motor protection device (including starting and normal operation).
-
The light phase outlet uses an online pressure adjustment structure, and the clarity of the light phase can be adjusted in a timely and flexible manner as needed.
-
The control panel is clear and intuitive, with simple and convenient operation.
-
The equipment has a cooling jacket on the upper and lower machine covers, effectively controlling the temperature rise of the separated material and reducing noise.
-